If you're building a custom steering setup, this weld-on adapter is exactly what you need. It welds directly onto a steel steering column to give you a solid, zero-play base. From there, you can bolt your steering wheel straight to it, or use it to mount a
If you're building a custom steering setup, this weld-on adapter is exactly what you need. It welds directly onto a steel steering column to give you a solid, zero-play base. From there, you can bolt your steering wheel straight to it, or use it to mount a quick-release hub.
We machined it with dual 6-bolt patterns (70mm and 74mm) so it plays nicely with almost every common aftermarket wheel or quick release on the market. We also added a handful of speed holes to keep the weight down without sacrificing strength.
Overall Diameter: 3.189"
Total Height: 1.500"
Inside Bore (Column Fitment): 0.755"
Top Neck OD: 1.125"
Flange Thickness: 0.295"
Outer Bolt Pattern: 6-bolt M4 x 0.7 on a 74mm (2.913") BCD
Inner Bolt Pattern: 6-bolt M4 x 0.7 on a 70mm (2.756") BCD
Note: This is a weld-on part. You (or your fabricator) will need to weld it to your column. The mounting holes come pre-tapped and ready for hardware.
